2008 Chrysler Crossfire Engine Options & Parameters

What engine does a 2008 Chrysler Crossfire have? It all depends on the trim level.

To determine which engine is used in your 2008 Chrysler Crossfire, locate the VIN (found in the owner’s manual, under the hood, or on the windshield or driver’s side door), write it down, and decode it online.

Below you can learn about the technical specifications for each 2008 Chrysler Crossfire motor and explore the list of other vehicles using the same engines.

2008 Chrysler Crossfire Engine Options

Mercedes-Benz / V6 / M112 - Petrol / E32 / 3.2L M112 E32

Engine manufacturer
A car and its engine do not always share the same manufacturer. Sometimes the engine and other components can be borrowed from other manufacturers.
Engine family
Usually in the same family are engines with the same volume and layout. Some parts of the same engine family may be interchangeable with each other.
Engine series
Each individual engine series has its own design features and is installed on certain vehicles.
The more cylinders in the engine and the higher their total volume, the more powerful the car is considered. On the other hand, the more cylinders an engine has, the higher the fuel consumption.
3.2L V-6
This is the main indicator of the car's power. The higher the number of horsepowers, the faster the car is able to accelerate.
222 hp
Engine torque is a measure of the twisting force that an engine produces at its crankshaft. It is a key factor in determining an engine's power output, as well as its ability to accelerate and tow heavy loads.
232 lb-ft.
Oil capacity
Keep an eye on the oil level in the engine. If it is too low, it can cause a breakdown, because all its elements must be abundantly lubricated during the operation. If it is too much oil, it will interfere with normal engine operation and create excessive resistance.
8.5 quarts
Oil viscosity
Different engines require different viscosity grades of oil, which are specified by the engine manufacturer. These viscosity grades are typically denoted by a number and a letter, such as 5W-30 or 10W-40. The number represents the oil's viscosity at low temperatures, while the letter represents its viscosity at high temperatures.
Oil drain plug torque
When changing the oil, make sure that you tighten the oil plug strictly with the necessary torque. If you screw it in too loosely, the oil may simply leak out, or if you apply too much force, you risk damaging the threads.
22 lb-ft
Coolant capacity
Lack of coolant in the system can lead to engine overheating, which in turn leads to costly repairs. Ensure that the coolant amount is always at the level specified in the manual.
11.8 quarts
Battery size
There is a special area for the battery in your car. When selecting a battery, make sure that it will fit in its intended location and will not be too large.
Limited 2dr Coupe
Horsepower: 215 hp; Torque: 229 Lb-ft; 0-60mph 0-100kmh s: 7.1 sec; Fuel economy city: 15 mpg; Fuel economy highway: 23 mpg;
Engine: no data
Limited 2dr Roadster
Horsepower: 215 hp; Torque: 229 Lb-ft; 0-60mph 0-100kmh s: 7.2 sec; Fuel economy city: 15 mpg; Fuel economy highway: 23 mpg;
Engine: no data

Have you ever been that kind of person who will be willing to have a hunch for the engine energy as well as the wind in your hair? Or, alternatively, would you like to make a satisfying family travelling? There is not any difference, as in both variants you must think through all the important elements that have an effect engine effectiveness to figure out how actually your specific 2008 Crossfire drives. And thus, our specialists` tables together with the essential engine specs will assist a driver to waste no time.

At present, planty vehicles, and your 2008 Crossfire will not be the difference, suggest enjoyable performance, however not every will get behind reputable work at a good price. Nevertheless, the 2008 Crossfire engine mainly was made to make sure that passengers as well as a vehicle driver may feel comfy whenever the automobile is speeding.